Enhon 4 Pack Replacement for H Track Dead End I Connector Compatible with WAC Lighting H Track Systems, 3 Wire 1 Track Lighting

Easy to Install (1) Locate the grounding point between the connector and the track. (2) Confirm the direction is correct, and then connect the track and connector. (3) Tighten the screws. (4) The installation is completed. The replacement for H track dead end I connector is applied to Minimize the track connection gap and save space, no additional accessories are required, it can be installed in just a few steps, easily solving the problem when you need to extend the track to cover more areas. Warm reminder: After installation, if the track system is not powered on, please check whether the installation has the following abnormalities. 1. Whether the wiring hole on the back of the product is damaged, scratched, or pierced the internal short wire. 2. The ground wire shrapnel of this product is not cut off as required. 3. The access direction is wrong and the ground copper wire inside the track is not touched, resulting in Not grounded. Dimensions Height: 0.7inch Width: 3.1inch Depth: 1.3inch Product Weight: 0.89 lbs Track Lighting Specifications System Type: Compatible with H-Track Accessory Type: Connectors Connector Type: Replacement for I-Connector