E-Series 60W 12VDC Dimmable LED Driver, Class 2, 120V, NEMA 3R, UL Enclosure

Magnitude Lighting E-Series 60W LED Driver — 12V DC

E60L12DC is a Magnitude Lighting LED Driver rated 60W with 120VAC input and 12V DC Constant Voltage output. It is forward-phase (TRIAC) dimmable down to 1% and is UL8750 Class 2. The compact aluminum housing includes an Integrated Junction Box with knockouts for streamlined installation.

Key Features

• Power: 60W maximum load
• Input Voltage: 120VAC ± 10%, 50/60Hz
• Output Voltage: 12.0VDC at max load
• Output Current: 5.00A at max load (12VDC)
• Dimming: Forward-phase (TRIAC) dimmable to 1%
• Minimum Load: 8W
• Dimensions: 6.77 in. L x 2.67 in. W x 1.30 in. H
• Enclosure Type: Integrated Junction Box with integrated wiring compartment and two 1/4 in. trade size (3/8 in.) knockouts
• IP Rating: NEMA 3R
• Certifications: UL8750, Class 2

Physical Design & Installation

Compact aluminum case with powder coat finish designed for easy concealment. The driver includes an Integrated Junction Box (integrated wiring compartment) and two 1/4 in. trade size (3/8 in.) knockouts to bring in line voltage and route low-voltage output wiring.

Dimming & Controls

Supports forward-phase (TRIAC) dimming and is specified to dim down to 1% when paired with compatible forward-phase dimmers. For stable dimming performance, maintain the specified minimum load of 8W on the driver output.

Performance & Build

Designed for high efficiency (>90% at 12VDC) and low operating temperature. Protection includes short circuit and over-voltage auto-reset. UL8750 Class 2 construction and NEMA 3R enclosure support demanding residential and light commercial installations.

Typical Applications

• 12V LED tape and linear accent lighting
• Under-cabinet and millwork lighting
• Signage and display lighting
• Indoor or outdoor installations where a NEMA 3R driver is required