48V Gigabit Power Over Ethernet POE Injector, 24W Wall PoE Adapter,100/1000Mbps 802.3af Compliant, Up to 100 Meters (328 Feet)

" Note: This PoE injector work for 10/100/1000Mbps Gigabit network. The iCreatin PoE Injector can save you money by using an existing Ethernet line to deliver data and power. The iCreatin PoE Injector can easily connect any IEEE 802.3af-compliant device to a non-PoE LAN switch port. This PoE Injector can be used to connect a wireless access point, IP phone, network camera, or any IEEE 802.3af powered device to a LAN switch. Reduce Wiring Costs With the iCreatin PoE Injector you can dramatically reduce wiring costs by powering devices through your existing Ethernet line rather than running new AC power lines. To use this PoE injector, all you need to do is connect the iCreatin PoE Injector to the LAN switch port, and then use your existing Ethernet Cable to deliver DC power and data to your device. Protect Your Equipment Now that you are running DC power to your networked equipment through the Cat5 cabling, you need to be sure that your devices are protected from power problems. The iCreatin PoE Injector is designed with short circuit protection Over Current and Over Voltage Protection, keeping your devices safe. It is also protect your products from overloads Specifications 2 Gigabit Ethernet ports 48-55V output voltage , up to 24W Rated power, support IEEE802.3af, Power feed: V+ 4,5; V- 7,8;and V+ 1,2; V- 3,6; Data rate: 10/100/1000Mbps. Deliver power up to about 328.1 feet(100 meters) Support 100-240V voltage input What in Box? 1 x US wall plug 24watt Gigabit PoE injector

• Converts a non-PoE Gigabit port to a PoE Gigabit port, Network a PoE device located up to 100 meters (328 ft.) away via Full Duplex Gigabit speeds
• Raspberry Pi 3B+ can work with this POE injector after installed this PoE hat or micro USB PoE Splitter
• Up to 48V 24W POE Adapter, Backwards compatible IEEE 802.3af PoE (15.4W). Middle-span and end-span
• This PoE Adapter power your 802.3af compatible devices, with no additional adapter needed. Just plug the network cable(not included) into your network switch and into the "Data In" port, then plug the cable to your device into the "Power&Data Out" port with your existing network cable
• Compatible all 802.3af PoE power devices like IP camera, IP phone, Wireless IP access point Gateway, Switch, Router and more..