12” Hardwired Power Strip (NO Power Cord), 4 20A (NEMA 5-20R) Vertical Tamper Resistant Outlets, with Ears (with mounting tabs on Both Ends), USB, White

12” Hardwired Power Strip with 4 20A TR Outlets, USB - * NOTE: Measurement is approximate: For installation purpose, the length of the power strip unit does not include ears, (mounting tabs 0.67" / 17mm on each end). For models with ears, 2 x 0.67" / 17mm need to be added to the product length in the dimension listed above; the width does not include the size of screws (min. 0.06" / 1.5mm) on each side; the height (or thickness) does not include the receptacles (Regular Outlets: 0.19" / 4.9mm; TR Outlets: 0.25" / 6.3mm) above the surface of the casing. - SAFETY WARNING: - Installation work of this unit must be done by a professional, a licensed electrician or an electric engineer. - Never install this unit during a thunder storm. - Switch off the power before you start installation work. - This unit is for indoor use only. - This unit is not intended for use in or around wet or potentially wet areas including, but not limited to, aquariums, saunas, showers and fountains.

• 12” / 0.30m Hardwired Power Strip, 4 20A Vertical Tamper Resistant Outlets, USB, White
• With EARS on both Ends, Total Length 13.27” / 337mm
• Measurement: L12″ x W1.61″ x H1.16″ (305 x 41 x 29.5mm); Casing/Outlet Height: 1.16"/0.25" (29.5/6.3mm)
• 2 USB Ports, (Type A) Output DC 5V/2.1A, Input AC 110-240V/0.5A/60Hz)
• No Power Cord - Hardwired and to be Mounted at Your Desired Location. Installation Instruction Included
• 12/3 AWG Wiring with NEMA 5-20R Receptacles
• Electrical Ratings: 125V/20A/60Hz/Recommended Max Load 1920W
• ETL Approved and Listed (Conforms to UL 5, 1310 and CAN/CSA C22.2 No. 62)
• 6 Easily Punched off Knockouts, 1 on Each Side - (Top/Bottom Cover, Both Sides/Ends)
• Great for Contractors, Electricians and Installers, as well as DIYers