10pcs Aluminum Heatsink 11x11x5mm with 3M8810 Thermal Tape Chip Cooling

Cooling Padsfeature10pcs 11x11x5mm Aluminum Heat Sink for 3M8810 Heat Transfer Peel and Stick TapeWidely used in 3D printer A4988 chipset, computer PC chipset, power IC, power devices, LED lamp devices, , Banan Pi, Orange Pi, etc.The tacky pressure sensitive adhesive included with 3M8810 contains thermally conductive ceramic fillers and does not require a heat cure cycle to form a good bond to many substrates. Just apply pressure to form a good bond and thermal interface.The specialized chemistry of 3M8810 makes the tape moderately soft and able to wet many surfaces, allowing it to conform well to uneven substrates, provide high adhesion, and act as a good thermal interfaceExcellent adhesion properties with good wetting and flow on many substrate surfaces. These tapes have good thermal conductivity and good insulation propertiesPlease check the spec sheet and make sure the heatsink is the right size for your component.SpecificationProduct Name: RadiatorMaterial: aluminumColor: silverDimensions: 11mm x 11mm x 5mmSuitable for 3M8810Thickness: 0.25mmCohesion - 8.3N/cmThermal conductivity - 0.6 W/mkThermal Resistance - 0.90 C-in2/WBreakdown Voltage - 38 KV/mmPackage Contents: 10 x Heatsinks for 3M8810

• Cooling Pads