0-60MPa Radial Stainless Steel Manometer Pressure Gauge Air Oil Water Hydraulic Pressure Gauge Thread G1/4(0-6Mpa)

Manometers0-60MPa Radialstainless steelmanometer pressure gauge Air oil water Hydraulic Pressure gauge Thread G1/4Item:YN-60Shock resistance Pressure GaugeInstall type:RadialSurface Diameter:60mmAccuracy level:2.5Thread size:G1/4Material:Shell:stainless steel,Core:brass,Connector:brass.Measuring range available:0-0.25mpa.0-0.4mpa.0-0.6mpa.0-1mpa.0-1.6mpa.0-2.5mpa.0-4mpa.0-6mpa.0-10mpa.0-16mpa.0-25mpa.0-40mpa.0-60mpa(Notice:1mpa=10kg=10bar=145psi)Notice: During 0-10MPA, the Dial is PSI and MPA,over 10MPA,the Dial is Kg/cm2 and MPADescription:Pressure gauges are precision instruments and should be avoided during transportation, installation and use.If the maximum stable pressure is used, it shall not exceed 2/3 of the upper limit of the measurement; when the pressure is fluctuating, it shall not exceed 1/2 of the upper limit of measurement. The applicable range of pressure gauges should maintain an optimum pressure of 1/3.Installation and use ambient temperature range of -40 ° C to 70 ° C, the relative temperature is not more than 80%.When using on equipment that is prone to pressure changes, install a protective device before installing it.Disabled: High temperature and corrosive gases, liquids or media that may crystallize and have a high viscosity should not be used! !==========High-concerned chemical : NoneModel Number : Y60Max Measuring Range : 200 PSI & AboveDisplay Type : AnalogDial Diameter : 2 - 3.9 InchesOrigin : Mainland Certification : Item : Air oil water Hydraulic Pressure gaugeSurface Diameter : 60mm/2.36inAccuracy level : 2.5Material : Shell:stainless steel,Core:brass,Connector:brass.Thread : G1/4Install type : Radial

• Manometers
• 0-60MPa Radial stainless steel manometer pressure gauge Air oil water Hydraulic Pressure gauge Thread G1/4